D-Class power amplifier amplify audio signal with Digital transmission. D-class consists with Chopping wave generator,
comparator, amplifier, and LPF. Comparator does compare between input level and Chopping wave then it makes PWM 0, 1
signal. This pulse signal can make easy to amplification and very stronger to noise.
Digital type is lighter and smaller than transistor type and more efficient and also, it reduces calescence symptom. Recently,
amplifier become smaller and more efficiency because of digital power amplifier’s development.
KEVIC’s Digital power amplifier is high quality and professional. It has high durability so give you trust.
- Input channel=2CH 3pin XLR BALANCE
- Input level
- Rated Input=+4dBu
- Rated output=600W / 4 ohm ,2ch
- Frequency Response=20Hz-20KHz ,-1dB
- S/N Ratio(1/2POWER,1KHz)=>100dB
- Cross modulation distortion(1/2power,1KHz)=<0.5%
- Pilot lamp of channel operate=existence
- Rated Voltage=AC220V/60Hz
- Power consumption=1200W
- Dimension(W x H x D)=482 X 88 X 432
- Weight=14kg
- Input channel=2CH 3pin XLR BALANCE
- Input level
- Rated Input=+4dBu
- Rated output=1200W / 4 ohm ,2ch
- Frequency Response=20Hz-20KHz ,-1dB
- S/N Ratio(1/2POWER,1KHz)=>100dB
- Cross modulation distortion(1/2power,1KHz)=<0.5%
- Pilot lamp of channel operate=existence
- Rated Voltage=AC220V/60Hz
- Power consumption=1200W
- Dimension(W x H x D)=482 X 88 X 432
- Weight=16kg
- Input channel=2CH 3pin XLR BALANCE
- Input level
- Rated Input=+4dBu
- Rated output=1600W / 4 ohm ,2ch
- Frequency Response=20Hz-20KHz ,-1dB
- S/N Ratio(1/2POWER,1KHz)=>100dB
- Cross modulation distortion(1/2power,1KHz)=<0.5%
- Pilot lamp of channel operate=existence
- Rated Voltage=AC220V/60Hz
- Power consumption=1600W
- Dimension(W x H x D)=482 X 88 X 432
- Weight=17kg
- Inout Channels:2XLR Balance with Link Ouputs
- Rated Output Power :2 X 600Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Demansions,mm:482 x 88 x 432
- Weight : 13Kg
- Inout Channels:2XLR Balance with Link Ouputs
- Rated Output Power :2 X 1200Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Network audio Format : Dante BK2
- Demansions,mm:482 x 88 x 432
- Weight : 15Kg
- Inout Channels:2XLR Balance with Link Ouputs
- Rated Output Power :2 X 1600Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Demansions,mm:482 x 88 x 432
- Weight : 17Kg

- Inout Channels:2XLR Balance with Link Ouputs
- Rated Output Power :2 X 600Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Network audio Format : Dante BK2
- Demansions,mm:482 x 88 x 432
- Weight : 13Kg
- Inout Channels:2XLR Balance with Link - Ouputs
- Rated Output Power :2 X 1200Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Network audio Format : Dante BK2
- Demansions,mm:482 x 88 x 432
- Weight : 15Kg
- Inout Channels:2XLR Balance with Link Ouputs
- Rated Output Power :2 X 1600Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Network audio Format : Dante BK2
- Demansions,mm:482 x 88 x 432
- Weight : 17Kg

 

5, Nonhyunro-24-gil, Gangnam-gu, Seoul, South Korea, (06302)
Factory : Kimhwa A&I Complex, 17-40, Weogol-Gil, Kimhwa-eup,Cheolwon-gun,Kwangwon-do,Korea
TEL : +82-2-579-1533 FAX : +82-2-579-1538 E-MAIL : webmaster@kevic.com, COPYRIGHTⓒ2007 KEVIC,INC. ALLRIGHT RSERVED

(주)케빅에 오신걸 환영합니다